Insulation Between, and Insulated Plasterboard Fixed to,. Timber Framework on Solid Brick Wall. Damp proof course. Kingspan Kooltherm®. K12 Framing Board. Total R–values for various thicknesses of Kingspan Kooltherm®. K12 Framing Board and different wall types. Product Thickness. Heat flow in. Heat flow out. Kooltherm K12 Framing Board, insulation for timber and steel framing systems. Kingspan Kooltherm K Framing Board is a premium performance insulation.
|Published (Last):||24 April 2012|
|PDF File Size:||2.4 Mb|
|ePub File Size:||9.7 Mb|
|Price:||Free* [*Free Regsitration Required]|
This reflective surface improves the thermal resistance of any cavity adjacent to the board.
Click on the specific application types below to view their System R-values. Cutting should be carried out either by using a fine toothed saw, or by scoring with a sharp knife, snapping the board over a straight edge and then cutting the facing on the other side. Ensure accurate trimming to achieve close-butting joints and continuity of insulation. The Selwyn Aquatic Centre in Rolleston provides an aquatic experience that can be mingspan all year round.
Buy Kingspan K12 80mm Insulation Board | Kooltherm K12 80mm
Jingspan and Where to Buy. Minimum order quantities apply. The contribution of the product Total R-values depends on installation and environmental conditions. System R-values Click on the specific application types below to view their System R-values.
Boards should be stored inside a building. If, however, temporary outdoor storage cannot be avoided then the boards should be stacked flat on a level base, clear of the ground, and completely protected from inclement weather through use of a polythene sheet or weatherproof tarpaulin.
Boards that have j12 allowed to get wet should not be used. Resistance to Solvents The insulation core is resistant to short-term contact with petrol and with most dilute acids, alkalis and mineral kinggspan. However, it is recommended that any spills be cleaned off fully before the boards are installed.
Ensure that safe methods of cleaning are used, as recommended by suppliers of the spilt liquid. The insulation core is not resistant to some solvent-based adhesive systems, particularly those containing methyl ethyl ketone.
Adhesives containing such solvents should not be used in association with this product. Damaged boards or boards that have been in contact with harsh solvents or acids should not be used.
Kingspan Kooltherm K12 80mm 2400mm x 1200mm (Pack / 4 sheets per pack)
Please note that the reflective surfaces on this product are designed to enhance their thermal performance. As such, the will reflect light as well as heat, including ultraviolet light. Therefore, if these boards are being installed during bright or sunny weather, it is advisable to wear UV protective sunglasses or goggles and if the skin is exposed for a significant period of time, protect bare skin with a UV block sun cream.
Foil facings are conductive to electricity – avoid contact with un-insulated electrical cables and fittings. Cutting Cutting should be carried out either by using a fine toothed saw, or by scoring with a sharp knife, snapping the board over a straight edge and then cutting the facing on the other side.
When taping a plastic squeegee or blade must be used to apply appropriate pressure to the tape.
Surfaces must be dry and free from dust, oil or grease prior to taping. Ensure that stud spacings do not exceed mm centres Attach appropriate wall ties to frame at spacings required for the masonry external leaf Fix Kingspan Kooltherm K12 Framing Board to the external surface of the frame structure ensuring vertical board joints coincide with a vertical member Ensure that the boards are lightly butted and continuity of insulation is maintained Use large headed galvanised clout nails or screws as fixings prior to the insulation boards being tied to the frame with an appropriate timber frame wall tie and insulation retaining disc Ensure that fixings are coincident with the underlying timber studs, top and bottom wall plates Construct the outer leaf of masonry in the conventional manner, using appropriate wall ties to hold the two wall leaves together.
Ensure that stud spacings do not exceed mm centres Fix Kingspan Kooltherm K12 Framing Board to the external surface of the frame structure ensuring vertical board joints coincide with a vertical member Ensure that the boards are lightly butted and continuity of insulation is maintained Use large headed galvanised clout nails or screws as temporary fixings prior to the secondary support batten being fitted Fix preservative treated softwood battens vertically to the wall frame, through the insulation sheating, ensuring that the battens and fixings are coincident with the underlying timber studs, top and bottom plates Consider the weight of cladding when selecting the type of fixing and fixing frequency for the battens Fix the external cladding panel to the secondary support batten in the traditional manner.
Kooltherm K12 Framing Board | Cavity Wall Insulation | Kingspan | New Zealand
Testing and Data Table. The Old Stone House Aged kinsgpan by years, but by its stories. Do you need help and advice on your project? Send Us An Enquiry. Kingspan Insulation New Zealand We’re ready to help.