Official Journal of the European Union. EN. Only the original UN/ECE texts have legal effect under international public law. The status and date. Regulation No 46 of the Economic Commission for Europe of the United Nations (UN/ECE) — Uniform provisions concerning the approval of devices for indirect. [ECE-R46 Uniform provisions concerning the approval of rear-view mirrors and of motor vehicles with regard to the installation of rear-view mirrors, MOD].
|Published (Last):||24 May 2012|
|PDF File Size:||13.90 Mb|
|ePub File Size:||10.7 Mb|
|Price:||Free* [*Free Regsitration Required]|
The additional symbol shall be placed in any convenient position in the vicinity of the circle containing the Letter “E”. If the left leg cannot be kept parallel to the right leg and the left foot cannot be supported by the structure, move the left foot until it is supported.
EUR-Lex – X(06) – EN – EUR-Lex
The mirror may, however, be locked g46 position from the outside. This can be either based on a CAD-generated model, a determination of the angles of light for the device when mounted on the relevant vehicle, or by carrying out relevant measurements on the relevant vehicle as described in Paragraph 6.
For each type of device for indirect vision the cee shall be accompanied by:. The devices for indirect vision are subjected to impact under the following different conditions: Name and address of manufacturer: A consolidated,updated version of the information folder, accompanied by a detailed description of the modification, shall be deemed to meet this requirement. Evaluation shall be made in the r64 of the monitor defined size, under consideration of the monitor design viewing direction see figure below.
Regulation 49 – 06 series (click to expand)
Flat Mirror Measurement The reflectance of flat mirror samples can be measured on instruments employing either the direct or the indirect calibration method. Trade name or mark of device: Exterior mirrors may be equipped with an additional aspherical part provided that the main mirror fulfils the requirements of the rr46 field of vision.
When the mirror has a device for adjusting its distance from the base, the device must be set in the position in which the distance between the housing and the base is shortest. Design torso angle … 3. Means of identification of the 4r6, if indicated on the device: The department may then either:.
Determination of the critical viewing distance of the monitor. The exterior mirror situated on the driver’s side must be capable of being adjusted from inside the efe while the door is closed, although the window may be open.
EU case law Case law Digital reports Directory of case law. If applicable, name and address of Manufacturer’s representative: This place shall be:. Require a further test report from the technical service responsible for conducting the tests.
Figure 2 Example of rear view mirror bending-test rig 6. The modification shall be designated an “extension” if, in addition to the change 4r6 the particulars recorded in the information folder, a b c Further inspections or tests are required, or Any information on the communication document with the exe of its attachments has changed, or Approval to a later series of amendments is requested after its entry into force. Other designated seating positions: Optional rear-view mirrors for L-category vehicles.
– Transport – UNECE
All mirrors shall be adjustable. Fce or less in proportion with the speed of the pedestrian-cyclist- moped driver, the dimensions of these road users increase as well.
The machine corresponds to that described in ISO Standard Measure the time resolved luminance value of a portion of the monitor that displays a white patch of the chessboard chart. To make this website work, we log user data and share it with processors.
They are classified as follows:.
Brigade helps you to achieve R46
The reflectance value is read directly from the indicating meter. General The apparatus shall consist of a light source, a holder for the test sample, a receiver unit with a photodetector and an indicating meter see Figure 1and means of eliminating the effects of extraneous light. System Latency A CMS shall have a sufficient short latency to render the scenery nearly at the same time. As from June 30,Contracting Parties applying this Regulation shall not be obliged to accept approvals of a type of vehicle or type of device for indirect vision which have not been granted in accordance with the 04 series of amendments to this Regulation.
The alignment of the sight buttons shall be maintained.
We do not re-word, summarise, cut or interpret the regulatory documents. However, breakage of the reflecting surface will be allowed if one of the following conditions is fulfilled: Lower leg segments are connected to the seat pan assembly at the T-bar joining the knees, which is a lateral extension of the adjustable thigh bar.